Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8703731
- Product Categories
- Friendly Links
- home > Supply > Site with a fence at the end of shelf @ @ Hebei site with a fence with a fence plant site
Information Name: | Site with a fence at the end of shelf @ @ Hebei site with a fence with a fence plant site |
Published: | 2012-01-13 |
Validity: | 90 |
Specifications: | Complete |
Quantity: | 10000.00 |
Price Description: | |
Detailed Product Description: | Site with a fence at the end of shelf @ @ Hebei site with a fence with a fence plant site Highway Series Framework of the fence welded fence materials per kilometer number of table Material Specification mm Quantity Remarks Column Φ80 × 3.0 × 2155 334 including column cap Frame 20 × 30 × 1.5 333 A3 steel Up bars 20 × 30 × 1.5 333 A3 steel Mesh Φ4-75 × 150 333 cold drawn steel wire mesh Cross with 20 × 2.5 × 2940 333 A3 steel Bilateral wire fence welded wire mesh: welded wire mesh metal wire, low carbon steel wire should be used, its chemical properties should be consistent with the provisions of GB343 for chip network, the number pad off should be less than 4% of the total number of solder joints; for network volumes , either an area of ??15 square meters of line off the number pad on the solder area should be smaller than 4% of the total. Welded Wire Mesh The accuracy requirements: 1, the wire diameter tolerances shall comply with the requirements in Table 2. Table II (Unit: mm) wire diameter 2.2 2.5 2.8 3.5 4.0 Tolerance ± 0.05 ± 0.05 ± 0.06 ± 0.06 ± 0.06 1, the mesh size of the allowable deviation should be consistent with the requirements in Table 3. Table 3 (unit: mm) mesh size mesh size allows the deviation tolerance 50 ± 2 100 ± 4 75 ± 3 150 ± 6 80 ± 3 160 ± 6 1, the mesh length and width tolerances are as follows: net surface length and width of ± 0.05%. Table 4 mesh welded wire mesh specifications and code size wire diameter mesh size (lateral width of the longitudinal length a × b) mm mesh length L (m) mesh width B (m) Network roll film WW-2.2-50 WW-2.2-100 2.2 50 × 50 100 × 50 30 1.5 ~ 1.9 WW-2.8-50 WW-2.8-100 WW-2.8-150 2.8 50 × 50 100 × 50 150 × 75 WW-3.5-75 WW-3.5-100 WW-3.5-150 WW-3.5-160 3.5 75 × 75 100 × 50 150 × 75 160 × 80 WW-4.0-150 WW-4.0-160 4.0 150 × 75 160 × 80 Note: The wire diameter is embalmed before. Fence with a hook with a hook net per kilometer fence material with scale 5 Code Name Size mm Material Quantity Remarks An established channel column 70 × 40 × 15 334 cold-formed channel 2 mesh Φ4-75 × 150 333 cold drawn steel wire Curling Fence Code Name Size mm Material Quantity Remarks One end of the first steel column Φ60 × 2.0 × 2300 1 with column cap 2 general column Φ48 × 1.5 × 2300 9 with column cap 3 bracing Φ38 × 1.5 × 2200 2 bolt group with 4 net horizontal wire Φ2.5 × 30000 36 cold drawn steel wire mesh Piece vertical wire Φ2.5 × 1800 591 5 ¢ 3.5 180 high-strength stainless steel clamp Strand barbed wire fence and barbed wire should be low-carbon steel wire, and its mechanical properties should be consistent with the provisions of GB343. Barbed wire each node has four thorns, thorn-shaped should be structured, stab sharp corners a ≤ 25 °, the angle between gill β is 90 ° ± 20 °, thorn length L of 16mm ± 3mm, barbed wire wrapped around strands of not less than 1.5 circle, twist tie should be solid |
Admin>>>
You are the 21160 visitor
Copyright © GuangDong ICP No. 10089450, Anping Wire Mesh Factory loop-through All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 21160 visitor
Copyright © GuangDong ICP No. 10089450, Anping Wire Mesh Factory loop-through All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility